Cryptography and SSL/TLS Toolkit

Frequently Asked Questions

Table of Contents

    Legal Questions

    Using the OpenSSL application

    Programming with OpenSSL

    Questions on Building and Testing OpenSSL


    Older Versions and Platforms

  • Do I need patent licenses to use OpenSSL?

    For information on intellectual property rights, please consult a lawyer. The OpenSSL team does not offer legal advice.

    You can configure OpenSSL so as not to use IDEA, MDC2 and RC5 by using

    ./config no-idea no-mdc2 no-rc5
  • Can I use OpenSSL with GPL software?

    On many systems including the major Linux and BSD distributions, yes (the GPL does not place restrictions on using libraries that are part of the normal operating system distribution).

    On other systems, the situation is less clear. Some GPL software copyright holders claim that you infringe on their rights if you use OpenSSL with their software on operating systems that don’t normally include OpenSSL.

    If you develop open source software that uses OpenSSL, you may find it useful to choose an other license than the GPL, or state explicitly that “This program is released under the GPL with the additional exemption that compiling, linking, and/or using OpenSSL is allowed.” If you are using GPL software developed by others, you may want to ask the copyright holder for permission to use their software with OpenSSL.

Using the OpenSSL application

  • Why do I get a “PRNG not seeded” error message?

    Cryptographic software needs a source of unpredictable data to work correctly. Many open source operating systems provide a “randomness device” (/dev/urandom or /dev/random) that serves this purpose. All OpenSSL versions try to use /dev/urandom by default; starting with version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not available.

    On other systems, applications have to call the RAND_add(3) or RAND_seed(3) function with appropriate data before generating keys or performing public key encryption. (These functions initialize the pseudo-random number generator, PRNG.) Some broken applications do not do this. As of version 0.9.5, the OpenSSL functions that need randomness report an error if the random number generator has not been seeded with at least 128 bits of randomness. If this error occurs and is not discussed in the documentation of the application you are using, please contact the author of that application; it is likely that it never worked correctly. OpenSSL 0.9.5 and later make the error visible by refusing to perform potentially insecure encryption.

    On systems without /dev/urandom and /dev/random, it is a good idea to use the Entropy Gathering Demon (EGD); see the RAND_egd(3) manpage for details. Starting with version 0.9.7, OpenSSL will automatically look for an EGD socket at /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool and /etc/entropy.

    Most components of the openssl command line utility automatically try to seed the random number generator from a file. The name of the default seeding file is determined as follows: If environment variable RANDFILE is set, then it names the seeding file. Otherwise if environment variable HOME is set, then the seeding file is $HOME/.rnd. If neither RANDFILE nor HOME is set, versions up to OpenSSL 0.9.6 will use file .rnd in the current directory while OpenSSL 0.9.6a uses no default seeding file at all. OpenSSL 0.9.6b and later will behave similarly to 0.9.6a, but will use a default of "C:" for HOME on Windows systems if the environment variable has not been set.

    If the default seeding file does not exist or is too short, the “PRNG not seeded” error message may occur.

    The openssl command line utility will write back a new state to the default seeding file (and create this file if necessary) unless there was no sufficient seeding.

    Pointing $RANDFILE to an Entropy Gathering Daemon socket does not work. Use the “-rand” option of the OpenSSL command line tools instead. The $RANDFILE environment variable and $HOME/.rnd are only used by the OpenSSL command line tools. Applications using the OpenSSL library provide their own configuration options to specify the entropy source, please check out the documentation coming the with application.

  • Why do I get an “unable to write ‘random state’” error message?

    Sometimes the openssl command line utility does not abort with a “PRNG not seeded” error message, but complains that it is “unable to write ‘random state’”. This message refers to the default seeding file (see previous answer). A possible reason is that no default filename is known because neither RANDFILE nor HOME is set. (Versions up to 0.9.6 used file “.rnd” in the current directory in this case, but this has changed with 0.9.6a.)

  • Why do I get errors when trying to decrypt 1.0.2 data with 1.1.0?

    A message digest is used to create the encrypt/decrypt key from a human-entered passphrase. In OpenSSL 1.1.0 we changed from MD5 to SHA-256. We did this as part of an overall change to move away from the now-insecure and broken MD5 algorithm. If you have old files, use the “-md md5” flag to decrypt them.

  • How do I create certificates or certificate requests?

    Check out the manual page. This provides a simple wrapper round the ‘req’, ‘verify’, ‘ca’ and ‘pkcs12’ utilities. For finer control check out the manual pages for the individual utilities and the certificate extensions documentation (in ca(1), req(1), and x509v3_config(5) ).

  • Why can’t I create certificate requests?

    You typically get the error:

    unable to find 'distinguished_name' in config
    problems making Certificate Request

    This is because it can’t find the configuration file. Check out the DIAGNOSTICS section of req(1) for more information.

  • Why does <SSL program> fail with a certificate verify error?

    This problem is usually indicated by log messages saying something like “unable to get local issuer certificate” or “self signed certificate”. When a certificate is verified its root CA must be “trusted” by OpenSSL this typically means that the CA certificate must be placed in a directory or file and the relevant program configured to read it. The OpenSSL program ‘verify’ behaves in a similar way and issues similar error messages: check the verify(1) program manual page for more information.

  • How can I create DSA certificates?

    Check the manual page for a DSA certificate example.

  • Why can’t I make an SSL connection to a server using a DSA certificate?

    Typically you’ll see a message saying there are no shared ciphers when the same setup works fine with an RSA certificate. There are two possible causes. The client may not support connections to DSA servers most web browsers (including Netscape and MSIE) only support connections to servers supporting RSA cipher suites. The other cause is that a set of DH parameters has not been supplied to the server. DH parameters can be created with the dhparam(1) command and loaded using the SSL_CTX_set_tmp_dh(3) for example: check the source to s_server in apps/s_server.c for an example.

  • How can I remove the passphrase on a private key?

    Firstly you should be really really sure you want to do this. Leaving a private key unencrypted is a major security risk. If you decide that you do have to do this check the EXAMPLES sections of the rsa(1) and dsa(1) manual pages.

  • Why can’t I use OpenSSL certificates with SSL client authentication?

    What will typically happen is that when a server requests authentication it will either not include your certificate or tell you that you have no client certificates (Netscape) or present you with an empty list box (MSIE). The reason for this is that when a server requests a client certificate it includes a list of CAs names which it will accept. Browsers will only let you select certificates from the list on the grounds that there is little point presenting a certificate which the server will reject.

    The solution is to add the relevant CA certificate to your servers “trusted CA list”. How you do this depends on the server software in uses. You can print out the servers list of acceptable CAs using the OpenSSL s_client tool:

    openssl s_client -connect -prexit

    If your server only requests certificates on certain URLs then you may need to manually issue an HTTP GET command to get the list when s_client connects:

    GET /some/page/needing/a/certificate.html

    If your CA does not appear in the list then this confirms the problem.

  • Why does my browser give a warning about a mismatched hostname?

    Browsers expect the server’s hostname to match the value in the commonName (CN) field of the certificate. If it does not then you get a warning.

  • How do I install a CA certificate into a browser?

    The usual way is to send the DER encoded certificate to the browser as MIME type application/x-x509-ca-cert, for example by clicking on an appropriate link. On MSIE certain extensions such as .der or .cacert may also work, or you can import the certificate using the certificate import wizard.

    You can convert a certificate to DER form using the command:

    openssl x509 -in ca.pem -outform DER -out ca.der

    Occasionally someone suggests using a command such as:

    openssl pkcs12 -export -out cacert.p12 -in cacert.pem -inkey cakey.pem

    DO NOT DO THIS! This command will give away your CAs private key and reduces its security to zero: allowing anyone to forge certificates in whatever name they choose.

  • Why is OpenSSL x509 DN output not conformant to RFC2253?

    The ways to print out the oneline format of the DN (Distinguished Name) have been extended in version 0.9.7 of OpenSSL. Using the new X509_NAME_print_ex(3) interface, the “-nameopt” option could be introduced. See the manual page of the “openssl x509” command line tool for details. The old behaviour has however been left as default for the sake of compatibility.

  • Why does OpenSSL set the authority key identifier (AKID) extension incorrectly?

    It doesn’t: this extension is often the cause of confusion.

    Consider a certificate chain A->B->C so that A signs B and B signs C. Suppose certificate C contains AKID.

    The purpose of this extension is to identify the authority certificate B. This can be done either by including the subject key identifier of B or its issuer name and serial number.

    In this latter case because it is identifying certificate B it must contain the issuer name and serial number of B.

    It is often wrongly assumed that it should contain the subject name of B. If it did this would be redundant information because it would duplicate the issuer name of C.

  • How can I set up a bundle of commercial root CA certificates?

    The OpenSSL software is shipped without any root CA certificate as the OpenSSL project does not have any policy on including or excluding any specific CA and does not intend to set up such a policy. Deciding about which CAs to support is up to application developers or administrators.

    Other projects do have other policies so you can for example extract the CA bundle used by Mozilla and/or modssl as described in this article:

  • Some secure servers ‘hang’ with OpenSSL 1.0.1, is this a bug?

    OpenSSL 1.0.1 is the first release to support TLS 1.2, among other things, this increases the size of the default ClientHello message to more than 255 bytes in length. Some software cannot handle this and hangs.

  • Some secure servers emit an infinite loop of HTTP headers with an OpenSSL 1.1.0 client, is this a bug?

    OpenSSL 1.1.0 introduced support for several new TLS extensions, including encrypt-then-mac and extended-master-secret, both of which provide significant security improvements. Unfortunately, some deployed TLS servers are severely broken and do not implement extensibility in a standards-compliant manner; these servers may exhibit strange behavior such as repeating the HTTP headers in a loop after receiving a ClientHello that includes such TLS extensions unknown to them. While these new TLS extensions provide significant security benefits to clients and are accordingly enabled by default in modern TLS clients, if bringing the server into compliance is not possible, the extension(s) in question can be disabled on a per-connection basis when talking to the buggy server, by using SSL_set_options(3).

Programming with OpenSSL

  • Is OpenSSL thread-safe?

    Yes but with some limitations; for example, an SSL connection cannot be used concurrently by multiple threads. This is true for most OpenSSL objects.

    For version 1.1.0 and later, there is nothing further you need do.

    For earlier versions than 1.1.0, it is necessary for your application to set up the thread callback functions. To do this, your application must call CRYPTO_set_locking_callback(3) and one of the CRYPTO_THREADID_set… API’s. See the OpenSSL threads manpage for details and “note on multi-threading” in the INSTALL file in the source distribution.

  • My code gets “undefined structure” or “unknown size” when building with 1.1.0 or later.

    In 1.1.0 we made most of the structures opaque. This means that you can no longer access the fields directly, but must use settor and accessor functions. You can also no longer have direct instances of the objects, but can only use pointers to them. For example, the first line below is wrong; the second is correct:

    RSA r; /* wrong */
    RSA *r; /* right */
  • I’ve compiled a program under Windows and it crashes: why?

    This is usually because you’ve missed the comment in INSTALL.W32. Your application must link against the same version of the Win32 C-Runtime against which your openssl libraries were linked. The default version for OpenSSL is /MD - “Multithreaded DLL”.

    If you are using Microsoft Visual C++’s IDE (Visual Studio), in many cases, your new project most likely defaulted to “Debug Singlethreaded” - /ML. This is NOT interchangeable with /MD and your program will crash, typically on the first BIO related read or write operation.

    For each of the six possible link stage configurations within Win32, your application must link against the same by which OpenSSL was built. If you are using MS Visual C++ (Studio) this can be changed by:

    1. Select Settings... from the Project Menu.
    2. Select the C/C++ Tab.
    3. Select "Code Generation from the "Category" drop down list box
    4. Select the Appropriate library (see table below) from the "Use
    run-time library" drop down list box.  Perform this step for both
    your debug and release versions of your application (look at the
    top left of the settings panel to change between the two)
    Single Threaded           /ML        -  MS VC++ often defaults to
                                            this for the release
                                            version of a new project.
    Debug Single Threaded     /MLd       -  MS VC++ often defaults to
                                            this for the debug version
                                            of a new project.
    Multithreaded             /MT
    Debug Multithreaded       /MTd
    Multithreaded DLL         /MD        -  OpenSSL defaults to this.
    Debug Multithreaded DLL   /MDd

    Note that debug and release libraries are NOT interchangeable. If you built OpenSSL with /MD your application must use /MD and cannot use /MDd.

    As per 0.9.8 the above limitation is eliminated for .DLLs. OpenSSL .DLLs compiled with some specific run-time option [we insist on the default /MD] can be deployed with application compiled with different option or even different compiler. But there is a catch! Instead of re-compiling OpenSSL toolkit, as you would have to with prior versions, you have to compile small C snippet with compiler and/or options of your choice. The snippet gets installed as <install-root>/include/openssl/applink.c and should be either added to your application project or simply #include-d in one [and only one] of your application source files. Failure to link this shim module into your application manifests itself as fatal “no OPENSSL_Applink” run-time error. An explicit reminder is due that in this situation [mixing compiler options] it is as important to add CRYPTO_malloc_init prior first call to OpenSSL.

  • How do I read or write a DER encoded buffer using the ASN1 functions?

    You have two options. You can either use a memory BIO in conjunction with the i2d_bio() or d2i_bio() functions or you can use the i2d_(), d2i_() functions directly. Since these are often the cause of grief here are some code fragments using PKCS7 as an example:

    unsigned char *buf, *p;
    int len = i2d_PKCS7(p7, NULL);
    buf = OPENSSL_malloc(len); /* error checking omitted */
    p = buf;
    i2d_PKCS7(p7, &p);

    At this point buf contains the len bytes of the DER encoding of p7.

    The opposite assumes we already have len bytes in buf:

    unsigned char *p = buf;
    p7 = d2i_PKCS7(NULL, &p, len);

    At this point p7 contains a valid PKCS7 structure or NULL if an error occurred. If an error occurred ERR_print_errors(bio) should give more information.

    The reason for the temporary variable ‘p’ is that the ASN1 functions increment the passed pointer so it is ready to read or write the next structure. This is often a cause of problems: without the temporary variable the buffer pointer is changed to point just after the data that has been read or written. This may well be uninitialized data and attempts to free the buffer will have unpredictable results because it no longer points to the same address.

    Memory allocation and encoding can also be combined in a single operation by the ASN1 routines:

    unsigned char *buf = NULL;
    int len = i2d_PKCS7(p7, &buf);
    if (len < 0) {
        /* Error */
    /* Do some things with 'buf' */
    /* Finished with buf: free it */

    In this special case the “buf” parameter is not incremented, it points to the start of the encoding.

  • OpenSSL uses DER but I need BER format: does OpenSSL support BER?

    The short answer is yes, because DER is a special case of BER and OpenSSL ASN1 decoders can process BER.

    The longer answer is that ASN1 structures can be encoded in a number of different ways. One set of ways is the Basic Encoding Rules (BER) with various permissible encodings. A restriction of BER is the Distinguished Encoding Rules (DER): these uniquely specify how a given structure is encoded.

    Therefore, because DER is a special case of BER, DER is an acceptable encoding for BER.

  • The encoding for GeneralName is wrong; why is the SEQUENCE tag missing?

    In RFC 5280 GeneralName is defined in the module in Appendix A.2, and that module specifies the use of IMPLICIT tagging. This means that there is not an explicit SEQUENCE (30) tag following the A0 tag (you just know from the ASN.1 that what follows the A1 tag is a SEQUENCE). This is in contrast to the value field within OtherName (test@kerberose-domain.internal), where the tag for UTF8String (0C) follows the A0 tag, since EXPLICIT tagging is specified for that particular field.

    You will notice the same thing if you look at other choices within GeneralName. If you look at the DNS names encoded in the subjectAltName extension, the 82 tag (corresponding to [2]) is not followed by a tag for IA5String (22). It is not needed since the ASN.1 indicates that what follows the 82 tag is an IA5String. However, if the module specified EXPLICIT encoding, then there would be a 16 tag after the 82 tag.

    (Thanks to David Cooper for this text.)

  • I tried to set a cipher list with a valid cipher, but the call fails, why?

    OpenSSL 1.1.0 introduced the concept of a “security level”, allowing for a configuration to be made more secure by excluding algorithms and key sizes that are known to be flawed or susceptible to brute force at a given level of work. SSL_CTX_set_security_level(3) can be used to programmatically set a security level, or the keyword “@SECLEVEL=N” can be used in a TLS cipher string, for values of N from 0 to 5 (inclusive). The default is level 1, which excludes MD5 as the MAC and algorithms with less than 80 bits of security. A value of 0 can be used, with appropriate caution, to produce behavior compatible with previous versions of OpenSSL (to the extent possible), but this is not recommended for general usage.

  • I’ve called <some function> and it fails, why?

    Before submitting a report or asking in one of the mailing lists, you should try to determine the cause. In particular, you should call ERR_print_errors(3) or ERR_print_errors_fp(3) after the failed call and see if the message helps. Note that the problem may occur earlier than you think – you should check for errors after every call where it is possible, otherwise the actual problem may be hidden because some OpenSSL functions clear the error state.

  • I just get a load of numbers for the error output, what do they mean?

    The actual format is described in the ERR_print_errors(3) manual page. You should call the function ERR_load_crypto_strings(3) before hand and the message will be output in text form. If you can’t do this (for example it is a pre-compiled binary) you can use the errstr(1) utility on the error code itself (the hex digits after the second colon).

  • Why do I get errors about unknown algorithms?

    The cause is forgetting to load OpenSSL’s table of algorithms with OpenSSL_add_all_algorithms(3). See the manual page for more information. This can cause several problems such as being unable to read in an encrypted PEM file, unable to decrypt a PKCS12 file or signature failure when verifying certificates.

  • Why can’t the OpenSSH configure script detect OpenSSL?

    Several reasons for problems with the automatic detection exist. OpenSSH requires at least version 0.9.5a of the OpenSSL libraries. Sometimes the distribution has installed an older version in the system locations that is detected instead of a new one installed. The OpenSSL library might have been compiled for another CPU or another mode (32/64 bits). Permissions might be wrong.

    The general answer is to check the config.log file generated when running the OpenSSH configure script. It should contain the detailed information on why the OpenSSL library was not detected or considered incompatible.

  • Can I use OpenSSL’s SSL library with non-blocking I/O?

    Yes; make sure to read the SSL_get_error(3) manual page!

    A pitfall to avoid: Don’t assume that SSL_read(3) will just read from the underlying transport or that SSL_write(3) will just write to it – it is also possible that SSL_write(3) cannot do any useful work until there is data to read, or that SSL_read(3) cannot do anything until it is possible to send data. One reason for this is that the peer may request a new TLS/SSL handshake at any time during the protocol, requiring a bi-directional message exchange; both SSL_read(3) and SSL_write(3) will try to continue any pending handshake.

  • Why doesn’t my server application receive a client certificate?

    Due to the TLS protocol definition, a client will only send a certificate, if explicitly asked by the server. Use the SSL_VERIFY_PEER flag of the SSL_CTX_set_verify(3) function to enable the use of client certificates.

  • I think I’ve detected a memory leak, is this a bug?

    In most cases the cause of an apparent memory leak is an OpenSSL internal table that is allocated when an application starts up. Since such tables do not grow in size over time they are harmless.

    Starting with OpenSSL 1.1.0, everything should be cleaned up on exit (or when the shared library unloads). If not, please find out what resource is leaked and report an issue. In previous releases, internal tables can be freed up when an application closes using various functions. Currently these include following:

    Thread-local cleanup functions include ERR_remove_state(3). Application-global cleanup functions that are aware of usage (and therefore thread-safe) include ENGINE_cleanup(3) and CONF_modules_unload(3). “Brutal” (thread-unsafe) Application-global cleanup functions include: ERR_free_strings(3), EVP_cleanup(3) and CRYPTO_cleanup_all_ex_data(3).

  • Why doesn’t a memory BIO work when a file does?

    This can occur in several cases for example reading an S/MIME email message. The reason is that a memory BIO can do one of two things when all the data has been read from it.

    The default behaviour is to indicate that no more data is available and that the call should be retried, this is to allow the application to fill up the BIO again if necessary.

    Alternatively it can indicate that no more data is available and that EOF has been reached.

    If a memory BIO is to behave in the same way as a file this second behaviour is needed. This must be done by calling:

    BIO_set_mem_eof_return(bio, 0);

    See the manual pages for more details.

  • Where are the declarations and implementations of d2i_X509(3) etc?

    These are defined and implemented by macros of the form:


    The implementation passes an ASN1 “template” defining the structure into an ASN1 interpreter using generalised functions such as ASN1_item_d2i(3).

  • When debugging I observe SIGILL during OpenSSL initialization: why?

    OpenSSL adapts to processor it executes on and for this reason has to query its capabilities. Unfortunately on some processors the only way to achieve this for non-privileged code is to attempt instructions that can cause Illegal Instruction exceptions. The initialization procedure is coded to handle these exceptions to manipulate corresponding bits in capabilities vector. This normally appears transparent, except when you execute it under debugger, which stops prior delivering signal to handler. Simply resuming execution does the trick, but when debugging a lot it might feel counterproductive. Two options. Either set explicit capability environment variable in order to bypass the capability query (see corresponding crypto/*cap.c for details). Or configure debugger not to stop upon SIGILL exception, e.g. in gdb case add ‘handle SIGILL nostop’ to your .gdbinit.

Questions on Building and Testing OpenSSL

  • Does OpenSSL use AES-NI or other speedups?

    The short answer is yes, unless you configure with “no-asm.”

    What OpenSSL does is not obvious. The INSTALL document talks about the no-asm configuration option. Details about what the assembler code does in terms of optimization are only available by reading the source code comments in the various Perl files that generate the assembler, mostly.

    On x86, the assembly code uses the CPUID instruction (see the OPENSSL_ia32cap.pod manpage) to determine if various instructions (AES, SSE, MMX, etc) are available and will use them if so. For other processors, similar tests are performed if at all possible.

  • Why does Clang sanitizer give warnings?

    You need to build with -DPEDANTIC to run sanitized tests, otherwise you will get optimized assembler versions of some functions.

  • Why does the linker complain about undefined symbols?

    Maybe the compilation was interrupted, and make doesn’t notice that something is missing. Run “make clean; make”.

    If you used ./Configure instead of ./config, make sure that you selected the right target. File formats may differ slightly between OS versions (for example sparcv8/sparcv9, or a.out/elf).

    In case you get errors about the following symbols, use the config option “no-asm”, as described in INSTALL:

    BF_cbc_encrypt, BF_decrypt, BF_encrypt, CAST_cbc_encrypt,
    CAST_decrypt, CAST_encrypt, RC4, RC5_32_cbc_encrypt, RC5_32_decrypt,
    RC5_32_encrypt, bn_add_words, bn_div_words, bn_mul_add_words,
    bn_mul_comba4, bn_mul_comba8, bn_mul_words, bn_sqr_comba4,
    bn_sqr_comba8, bn_sqr_words, bn_sub_words, des_decrypt3,
    des_ede3_cbc_encrypt, des_encrypt, des_encrypt2, des_encrypt3,
    des_ncbc_encrypt, md5_block_asm_host_order, sha1_block_asm_data_order

    If none of these helps, you may want to try using the current snapshot. If the problem persists, please submit a bug report.

  • Why does the OpenSSL compilation fail with “ar: command not found”?

    Getting this message is quite usual on Solaris 2, because Sun has hidden away ‘ar’ and other development commands in directories that aren’t in $PATH by default. One of those directories is ‘/usr/ccs/bin’. The quickest way to fix this is to do the following (it assumes you use sh or any sh-compatible shell):

    PATH=${PATH}:/usr/ccs/bin; export PATH

    and then redo the compilation. What you should really do is make sure ‘/usr/ccs/bin’ is permanently in your $PATH, for example through your ‘.profile’ (again, assuming you use a sh-compatible shell).

  • Why does the OpenSSL compilation fail on Win32 with VC++?

    Sometimes, you may get reports from VC++ command line (cl) that it can’t find standard include files like stdio.h and other weirdnesses. One possible cause is that the environment isn’t correctly set up. To solve that problem for VC++ versions up to 6, one should run VCVARS32.BAT which is found in the ‘bin’ subdirectory of the VC++ installation directory (somewhere under ‘Program Files’). For VC++ version 7 (and up?), which is also called VS.NET, the file is called VSVARS32.BAT instead. This needs to be done prior to running NMAKE, and the changes are only valid for the current DOS session.

  • What is special about OpenSSL on Redhat?

    Red Hat Linux (release 7.0 and later) include a preinstalled limited version of OpenSSL. Red Hat has chosen to disable support for IDEA, RC5 and MDC2 in this version. The same may apply to other Linux distributions. Users may therefore wish to install more or all of the features left out.

    To do this you MUST ensure that you do not overwrite the openssl that is in /usr/bin on your Red Hat machine. Several packages depend on this file, including sendmail and ssh. /usr/local/bin is a good alternative choice. The libraries that come with Red Hat 7.0 onwards have different names and so are not affected. (eg For Red Hat 7.2 they are /lib/ and /lib/ with symlinks /lib/ and /lib/ respectively).

    Please note that we have been advised by Red Hat attempting to recompile the openssl rpm with all the cryptography enabled will not work. All other packages depend on the original Red Hat supplied openssl package. It is also worth noting that due to the way Red Hat supplies its packages, updates to openssl on each distribution never change the package version, only the build number. For example, on Red Hat 7.1, the latest openssl package has version number 0.9.6 and build number 9 even though it contains all the relevant updates in packages up to and including 0.9.6b.

    A possible way around this is to persuade Red Hat to produce a non-US version of Red Hat Linux.

  • Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?

    Failure in BN_sqr test is most likely caused by a failure to configure the toolkit for current platform or lack of support for the platform in question. Run ‘./config -t’ and ‘./apps/openssl version -p’. Do these platform identifiers match? If they don’t, then you most likely failed to run ./config and you’re hereby advised to do so before filing a bug report. If ./config itself fails to run, then it’s most likely problem with your local environment and you should turn to your system administrator (or similar). If identifiers match (and/or no alternative identifier is suggested by ./config script), then the platform is unsupported. There might or might not be a workaround. Most notably on SPARC64 platforms with GNU C compiler you should be able to produce a working build by running ‘./config -m32’. I understand that -m32 might not be what you want/need, but the build should be operational. For further details turn to

  • Why does the OpenSSL test suite fail in sha512t on x86 CPU?

    If the test program in question fails withs SIGILL, Illegal Instruction exception, then you more than likely to run SSE2-capable CPU, such as Intel P4, under control of kernel which does not support SSE2 instruction extensions. See accompanying INSTALL file and OPENSSL_ia32cap(3) documentation page for further information.

  • Why does compiler fail to compile sha512.c?

    OpenSSL SHA-512 implementation depends on compiler support for 64-bit integer type. Few elder compilers [ULTRIX cc, SCO compiler to mention a couple] lack support for this and therefore are incapable of compiling the module in question. The recommendation is to disable SHA-512 by adding no-sha512 to ./config [or ./Configure] command line. Another possible alternative might be to switch to GCC.

  • Test suite still fails, what to do?

    Another common reason for test failures is bugs in the toolchain or run-time environment. Compiler bugs often appear in rather bizarre ways, they never make sense, and tend to emerge when you least expect them. One thing to try is to reduce the level of optimization (such as by editing the CFLAG variable line in the top-level Makefile), and then recompile and re-run the test.

  • I think I’ve found a bug, what should I do?

    If you are a new user then it is quite likely you haven’t found a bug and something is happening you aren’t familiar with. Check this FAQ, the associated documentation and the mailing lists for similar queries. If you are still unsure whether it is a bug or not submit a query to the openssl-users mailing list.

    If you think you have found a bug based on the output of static analysis tools then please manually check the issue is genuine. Such tools can produce a LOT of false positives.

  • I’m SURE I’ve found a bug, how do I report it?

    Please see

  • I’ve found a security issue, how do I report it?

    If you think your bug has security implications then please send it to if you don’t get a prompt reply at least acknowledging receipt then resend or mail it directly to one of the more active team members (e.g. Steve). If you wish to use PGP to send in a report please use one or more of the keys of the OMC listed at

    Note that bugs only present in the openssl utility are not in general considered to be security issues.

  • How do I enable weak ciphers?

    Warning: known-insecure ciphers are disabled in newer releases of OpenSSL. There is good reason why these have been disabled by default. Consider upgrading to more robust options as these ciphers may only provide a facade of security. This option is not recommended for anyone other than maintainers of legacy applications. There are two parts to doing this. First, you must configure with “enable-weak-ssl-ciphers.” This compiles the ciphers, but does not enable them at run-time; to do this you must set the “security level” flag. This can be done at build time to change the default, or it can be done at runtime to change it for particular SSL_CTX; see for details.

    In other words, you should do one of the following:

    ./config enable-weak-ssl-ciphers -DOPENSSL_TLS_SECURITY_LEVEL=0


    # To configure and build
    ./config enable-weak-ssl-ciphers
    /* In your code */
    SSL_CTX_set_security_level(ctx, 0);


  • Which is the current version of OpenSSL?

    The current version is available from

    In addition to the current stable release, you can also access daily snapshots of the OpenSSL development version at, or get it by anonymous Git access.

  • Where is the documentation?

    OpenSSL is a library that provides cryptographic functionality to applications such as secure web servers. Be sure to read the documentation of the application you want to use. The INSTALL file explains how to install this library.

    OpenSSL includes a command line utility that can be used to perform a variety of cryptographic functions. It is described in the openssl(1) manpage. Documentation for developers is currently being written. Many manual pages are available; overviews of libcrypto and libssl are given in the crypto(7) and ssl(7) manpages.

    The OpenSSL manpages are installed in /usr/local/ssl/man/ (or a different directory if you specified one as described in INSTALL). In addition, you can read the most current versions at Note that the online documents refer to the very latest development versions of OpenSSL and may include features not present in released versions. If in doubt refer to the documentation that came with the version of OpenSSL you are using. The pod format documentation is included in each OpenSSL distribution under the docs directory.

  • I need a FIPS validated offering

    Please see

  • How can I contact the OpenSSL developers?

    The README file describes how to submit bug reports and patches to OpenSSL. Information on the OpenSSL mailing lists is available from

  • Where can I get a compiled version of OpenSSL?

    You can find pointers to binary distributions in

    Some applications that use OpenSSL are distributed in binary form. When using such an application, you don’t need to install OpenSSL yourself; the application will include the required parts (e.g. DLLs).

    If you want to build OpenSSL on a Windows system and you don’t have a C compiler, read the “Mingw32” section of INSTALL.W32 for information on how to obtain and install the free GNU C compiler.

    A number of Linux and *BSD distributions include OpenSSL.

  • Why aren’t tools like ‘autoconf’ and ‘libtool’ or ‘cmake’ used?

    A number of these tools are great and wonderful, but are usually centered around one or a few platforms. ‘autoconf’ and ‘libtool’ are Unix centric. ‘cmake’ is a bit more widely spread, but not enough to cover the platforms we support.

    For OpenSSL 1.1, we decided to base our build system on perl, information files and build file (Makefile) templates, thereby covering all the systems we support. Perl was the base language of choice because we already use it in diverse scripts, and it’s one of the most widely spread scripting languages.

  • How do I check the authenticity of the OpenSSL distribution?

    We provide PGP signatures and a variety of digests on each release. For example, one of the following might work on your system:

    sha1sum TARBALL | awk '{print $1;}' | cmp - TARBALL.sha1
    sha256sum TARBALL | awk '{print $1;}' | cmp - TARBALL.sha256

    You can check authenticity using pgp or gpg. You need the OpenSSL OMC member public key used to sign it (download it from a key server or see a list of keys at Then just do:

    pgp TARBALL.asc
  • How does the versioning scheme work?

    Please see

  • Do you have a bug bounty program?

    The project does not. Google runs a program; so does HackerOne, In general, if you have found a security issue, send email to Please note that we do not consider DNS configurations or Website configuration to be security issues.

Older Versions and Platforms

  • What does “old” mean here?

    Any OpenSSL release before 1.0.2, and any platform that is not in wide use, and doesn’t get full support. Or something like that.

  • Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?

    For OpenSSL 0.9.7 the OID table was extended and corrected. In earlier versions, uniqueIdentifier was incorrectly used for X.509 certificates. The correct name according to RFC2256 (LDAP) is x500UniqueIdentifier. Change your code to use the new name when compiling against OpenSSL 0.9.7.